# Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or
# /usr/share/doc/ifupdown/examples for more information.
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp

# mac80211-based drivers, as access point
#auto wlan0
#iface wlan0 inet static
#        address 10.1.10.1
#        netmask 255.255.255.0
#        broadcast 10.1.10.255
#		hostapd /etc/hostapd/hostapd.wlan0.conf
#        up nat.sh wlan0 eth0 "10.1.10.0/24"

# as wireless client (supplicant)
#auto wlan0
#iface wlan0 inet dhcp
#        wpa-driver wext
#        wpa-ssid <your ssid>
#        wpa-psk <your WPA shared key>
#        wpa-key-mgmt WPA-PSK
#        ## for WPA
#        wpa-pairwise TKIP
#        wpa-group TKIP
#        wpa-proto WPA
#        ## for WPA2
#        #wpa-pairwise CCMP TKIP
#        #wpa-group CCMP TKIP
#        #wpa-proto RSN
#        wireless-mode Managed

#auto wlan1
#iface wlan1 inet static
#        address 10.1.20.1
#        netmask 255.255.255.0
#        broadcast 10.1.20.255
#		hostapd /etc/hostapd/hostapd.wlan1.conf
#        up nat.sh wlan1 eth0 "10.1.20.0/24"

#auto wlan0
#iface wlan0 inet static
#        address 10.1.10.1
#        netmask 255.255.255.0
#        broadcast 10.1.10.255
#        up iwconfig wlan0 essid voyage mode Master
# 	 up nat.sh wlan0 eth0 "10.1.10.0/24"

#auto ath0
#iface ath0 inet static
#        address 10.1.20.1
#        netmask 255.255.255.0
#        broadcast 10.1.20.255
#        #pre-up wlanconfig ath create wlandev wifi1 wlanmode ap
#         madwifi-base wifi1
#         wireless-mode Master
#         wireless-mode Adhoc
#         wireless-mode Managed
#        #up iwpriv ath0 mode 3
#		 up iwpriv ath0 bintval 1000
#        up iwconfig ath0 mode master
#        up iwconfig ath0 essid voyage
#        up iwconfig ath0 txpower auto
#        up iwconfig ath0 enc off
#        up iwconfig ath0 rate auto
#        up nat.sh ath0 eth0 "10.1.20.0/24"

#auto eth1
#iface eth1 inet static
#       address 10.1.20.1
#       netmask 255.255.255.0
#       broadcast 10.1.20.255

#auto eth2
#iface eth2 inet static
#       address 10.1.30.1
#       netmask 255.255.255.0
#       broadcast 10.1.30.255

#auto eth3
#iface eth3 inet static
#       address 10.1.40.1
#       netmask 255.255.255.0
#       broadcast 10.1.40.255

##########################################################
#	Sample ath0 with wpa_supplicant settings

#auto ath0
#iface ath0 inet dhcp
#        madwifi-base wifi0
#        wireless-mode Managed
#        wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

##########################################################
#	Sample WDS Bridge Settings

# madwifi-ng WDS Bridge
#auto br0
#iface br0 inet static
#       address 192.168.1.2
#       netmask 255.255.255.0
#       network 192.168.1.0
#       broadcast 192.168.1.255
#       gateway 192.168.1.1
#       bridge_ports eth0 ath0 ath1
#       pre-up wlanconfig ath0 create wlandev wifi0 wlanmode ap
#       pre-up wlanconfig ath1 create wlandev wifi0 wlanmode wds
#       pre-up iwpriv ath0 mode 11g
#       pre-up iwpriv ath0 bintval 1000
#       pre-up iwconfig ath0 essid "voyage-wds" channel 1
#       up ifconfig ath0 down ; ifconfig ath0 up # this is a workaround
#       up iwpriv ath1 wds 1
#       up iwpriv ath1 wds_add AA:BB:CC:DD:EE:FF
#       up ifconfig ath1 down ; ifconfig ath1 up # this is a workaround
#       post-down wlanconfig ath0 destroy
#       post-down wlanconfig ath1 destroy

# hostap WDS Bridge
#auto br0
#iface br0 inet static
#        address 192.168.1.2
#        netmask 255.255.255.0
#        network 192.168.1.0
#        broadcast 192.168.1.255
#        gateway 192.168.1.1
#        bridge_ports eth0 wlan0 wlan0wds0
#        pre-up iwconfig wlan0 mode Master essid voyage-wds channel 1
#        pre-up iwpriv wlan0 wds_add AA:BB:CC:DD:EE:FF
#        #prism2_param wlan0 autom_ap_wds 1
#        #prism2_param wlan0 other_ap_policy 1

##########################################################
#	Sample Ad-hoc Settings

# madwifi-ng Ad-hoc
#auto ath0
#iface ath0 inet static
#       address 10.1.10.1
#       netmask 255.255.255.0
#       broadcast 10.1.10.255
#       #gateway 10.1.10.1
#       #pre-up wlanconfig ath create wlandev wifi0 wlanmode adhoc
#       madwifi-base wifi0
#       wireless-channel 1
#       wireless-essid voyage-adhoc
#       wireless-mode Ad-hoc
#		# NAT not needed for node
#       up nat.sh ath0 eth0 "10.1.10.0/24"

# hostap Ad-hoc 
#auto wlan0
#iface wlan0 inet static
#       address 10.1.10.1
#       netmask 255.255.255.0
#       broadcast 10.1.10.255
#		#gateway 10.1.10.1
#       up iwconfig wlan0 essid voyage-adhoc mode Ad-hoc
#		# NAT not needed for node
#       up nat.sh wlan0 eth0 "10.1.30.0/24"

# Prism 54 Ad-hoc 
#auto eth2
#iface eth2 inet static
#       address 10.1.30.1
#       netmask 255.255.255.0
#       broadcast 10.1.30.255
#		#gateway 10.1.30.1
#       up iwconfig eth2 essid voyage-adhoc mode Ad-hoc
#		# NAT not needed for node
#       up nat.sh eth2 eth0 "10.1.30.0/24"