0.9-rc1 (30 Sep 2012) - [kernel] linux-image-3.4.4-voyage_12.0-1 - [netfilter] add netlink acct, conntrack procfs and timeout - [netfilter] add ecn and nfacct matach - [netfilter] remove rtsp nat support [not available in openwrt patch] - [fs] enable gfs2, hfs+ - [general/live] - new debian live config: change live-conf files and directory structure - fix removing .svn in rootfs - [voyage-util] - voyage-sync: skip sync at stop when running live cd - voyage-sync: detect /lib/init/rw (for squeeze) - voyage-sync: change tmpfs to /tmp - voyage-util: change version to 0.9 - voyage-util: [PATCH] debug: add debug.rc and demo script mydbg.sh (Jim Cromie) - voyage-util: [PATCH] voyage-install: allow "Select Target Profile" to keep current settings (Jim Cromie) - [mpd] - update to 0.18git as of 20120913 - [PATCH] support of dsf file sample rate of up to 5644800 - enable sndfile plug-in all time 0.8.5 (22 May 2012) - [kernel] linux-image-3.2.17-voyage_11.0-1 - [general] enable in-kernel alix - [general] enable sparse IRQ - [general] remove Moorestown platform support - [netfilter] add conntrack zones, timestamp - [netfilter] add xt target set, idletimer, tproxy - [netfilter] add match cluster, cpu, devgroup, ipvs, socket - [netfilter] add ipset netiface - [netfilter] add ipvs, enable all helpers and load balancing support - [netfilter] add clusterip package mangling - [net] enable DCB - [net] add phy drivers - [misc] add altera firmware download module - [i2c] add Intel eg20t, remove scx200_i2c (deprecated) - [gpio] enable in-kernel gpio_cs5535, enable gpio_pch - [usb] enable usb led, mass storage, uwb - [usb] enable announce new device - [leds] enable in-kernel leds-gpio - [fs] enable btrfs, squashfs zlib - [input] enable uinput and ati_remote2 - [sound] enable CA0132 codec, static quirks for realtek codec - [ir] enable ITE CIR, fintek, redrat3 - [general] - based on Debian 6.0.5 "Squeeze" - Debian Live conf: workaround static IP configuration in webgui by disable wlan0 and wlan1 entries in /etc/network/interfaces - Debian Live conf: add clean target - Debian Live conf: fix to support 3.x.y kernel - add firmware-linux-nonfree - [voyage-util] - new version 0.11-1 - [PATCH] fix /etc/modprobe.d/.conf writer (Jim Cromie) - [PATCH 09/11] grub titles should have version, not date-of-install (Jim Cromie) - add 6501 profile - force tsc clocksource for ALIX - [one] - fix voyage one build failure on squeeze - add asterisk related package for ONE (ooh323, dahdi, mobile, mp3, voicemail, moh-opsound-gsm, modules) - add digium firmware to ONE and do not remove perl and nano package - asterisk 1.8.12.0~rc3 - dahdi 2.6.1 - [mpd] - add nano package - make http://voyage.local/Music for MPod/MPad cover art - add php-fastcgi init.d script, to be used with nginx - add djmount to mpd - fix PATH in fastcgi - add voyage.local as site conf for nginx - replace lighttpd with nginx for MPD - mpd 0.16.7 - add ntfs-3g - do not log access.log in nginx 0.8.0 (31 Oct 2011) - [kernel] linux-image-3.0.0-voyage_10.0-1 - based on Debian kernel source 3.0.0-5 - [general] enable IRQ force threading - [netfilter] add conntrack broadcast & SNMP - [netfilter] add xt target checksum, ct, tee - [netfilter] add ipset - [wireless] enable WiMAX and i2400 - [wireless] add rt2800, rtl8192 - [framebuffer] add riva, matrox, via, udl - [sound] enable alsa sound driver instead of using out-of-tree kernel modules - [amd64] enable IA32 emulation - [general] - based on Debian 6.0.3 "Squeeze" - add sudo to voyage linux - add support of ath9k 11n in hostapd.conf - add ppp, pppoe, bzip2, psmisc, usbutils, libdaemon0, ifplugd, live-initramfs & live-boot-initramfs-tools packages - change to use 0.8 apt repository - change to use JP debian mirror as apt source as it is faster - rewrite README - hostapd 0.7.3-2 - wpasupplicant 0.7.3-4 - iw 3.1-1 - [voyage-util] - new version 0.10-1 - Saving date with voyage-sync (Teco Boot) - add VOYAGE_SAVE_DATE_TIME in /etc/defaults/voyage-util - change banner version to 0.8 - teach installer to write /etc/modprobe.d/profile.conf - add BOOTARGS to grub and lilo configs (Jim Cromie) - [PATCH 06/11] voyage-update.sh: setspeed doesnt exist (Jim Cromie) - [PATCH 07/11] spelling (Jim Cromie) - [PATCH 09/11] grub titles should have version, not date-of-install (Jim Cromie) - parallelize sync back to disk device - update /etc/hosts after copy files - support non-ext2 filesystem for installation - [one] - change to use dahdi-firmware-nonfree - asterisk 1.8.4.2 - asterisk-gui 2.1.0~rc1 - dahdi 2.5.0 - [mpd] - disable sndfile plugin for mpd - mpd 0.16.5 0.7.5 (28 Jun 2011) - [kernel] linux-image-2.6.38-voyage_9.0-1 - based on Debian kernel source 2.6.38-5 - [general] enable SMP, XZ & LZO compression - [netfilter] enable mark, connmark - [network] enable lstp, 802.15.4, tcp_md5sig - [ata] enable AMD, IXP, cs5535/6, VIA - [md] enable raid 0/1/10/456 - [wireless] enable ath9k_htc, carl9170, rt2800, iwlwifi, rtlwifi - [voip] enable mISDN and driver - [sound] disable all sound drivers. Now rely on external ALSA driver - [ir] enable lirc and drivers - [framebuffer] enable nVidia, i810, Intel, Matrox, Radeon, Geode_GX drivers - [leds] enable net5501 and usbdev trigger - [fs] enable NLS codepages and XZ for squashfs - [crypto] enable geode_aes - [misc] enable batman-adv, cs5535_mfgpt, gpio_cs5535 - [general] - based on Debian 6.0.2 "Squeeze" - remove madwifi package - add madwifi driver to backlist and make ath5k as default - add prism54 driver to backlist and make p54pci as default - fix lilo in kernel install symlink hook - remove pptpd, parprouted package - add nocatsplash, firmware-realtek, crda, wireless-regdb package - add hostapd configuration defaults for nl80211-based device - [voyage-util] - new version 0.9-1 - use blkid since /lib/udev/vol_id no longer available in squeeze - [one] - remove most of network and VPN utils - update to Asterisk 1.8.3 and dahdi 2.4.0 - add "voyage" user to asterisk-gui - [mpd] - use alsa-modules-2.6.38-voyage_1.0.24 - enable VOYAGE_SYNC_RECOVER - enable 5 min cron job for "voyage-sync sync" - enable utf8 for vfat/fat usb mount - add avahi-daemon and avahi-utils package 0.7.0 (08 Feb 2011) - [kernel] linux-image-2.6.32-voyage_8.0-1 - based on Debian 6.0 "Squeeze" kernel source 2.6.32-30 - [wireless] enabled b43, brcm80211 - [telephony] enabled ISDN, mISDN - [usb] enabled cp210x, mos7840, wwan - [misc] enabled TREE_RCU, AGP, HIDRAW - [fs] enabled aufs - [kernel] linux-image-2.6.33.7-rt29-voyage_8.0-1 (for Voyage ONE and MPD) - based on Abogani's PPA realtime kernel 2.6.33.29.1 - [general] - based on Debian 6.0 "Squeeze" - add dhcp3, makedev, sysklogd, klogd; - remove sqlite3, deborphan, aufs-tools, inetutils-inetd, inetutils-syslogd, nocatsplash - do not remove dhcp3, remove libgdbm3 - add iw to voyage package list - use grub-legacy instead grub2 - remove aufs modules for squeeze and use in-kernel (2.6.32) - rename /var/lib/dhcp3 to /var/lib/dhcp - change prism54 firmware URL - rewrite some codes for building voyage linux, mpd and one - [madwifi] upgrade to madwifi-trunk 0.9.4+r4132trunk.20100921-1 - [live-cd] - add back all_generic_ide for LIVE CD - [voyage-util] - fix format-cf.sh for not formating ext2fs - fix format-cf.sh not create ext2fs when legacy mode - insserv compatible for init.d scripts - add debug info when setting bootloader - use bash in format-cf.sh - Fix profile not loaded if providing "-P ALIX" in voyage-install.sh - change voyage (motd) banner to version 0.7 - [voyage-sync] detect /ro before copying to rw - [voyage-sync] check sync dir before sync - [voyage-sync] write log to syslog - [voyage-one] - New debian-live config for Voyage ONE - [voyage-mpd] - New debian-live config for Voyage MPD - add lighttpd and webgui to MPD - add meshium webgui and mpd plugin 0.6.5 (17 Feb 2010) - [kernel] linux-image-2.6.30-voyage_7.0-1 - [general] Debian kernel source 2.6.30-8squeeze1 - [general] enable lzma for kernel image compression - [general] enable verbose bootup with timestamp - [wireless] enable rate minstrel control, 80211s mesh - [ide] enable cs5536 block device - [net] enable PPP multi-link - [netdev] enable atl2, atl1 and atl1c - [netdev-wireless] enable ath9k, ar9170, rt2x00 - [usb] enable hso, usb gadget amd5536 - [i2c] enable gpiolib, gpio for sysfs, pcf857x, pcf9591 and scx200_i2C - [v4l] enable GSPCA based devices, philips cameras - [led] enable stock leds driver for alix2 and gpio led trigger - [fs] enable ext4 and built-in squashfs - [crypto] enable most of crypto drivers - [staging] enable et131x, rt2860, rt2870 - [madwifi] upgrade to madwifi-trunk 0.9.4+r4099trunk.20090929-1 - [misc] - /etc/network/interfaces add bintval 1000 and disable iwpriv ath0 mode 3 - do not remove /usr/share/zoneinfo - add usb mount udev rules - add back /ro directory to distro and add /var/lib/logrotate to /ro - change kernel package flavour to -voyage instead of -486-voyage - [live-cd] - remove all_generic_ide in Live CD boot parameter - set mksquashfs to use -b 1M option - disable memtest, d-i and win32loader for Live CD - [voyage-util] - better debhelper support for initscripts - reconfigure resolvconf at installation - fix profile and serial menu items without numbers - add new voyage-rwfile script to support /ro /rw style read-only mode - [voyage-sync] add empty directory checking - [voyage-sync] fix .* hidden files not sync'ing - [voyage-sync] add VOYAGE_RW_DIRS for non-sync read-write directories - [voyage-sync] run sync command after finish synchronization to disk - [voyage-sync] corrected some typos and preserve ownership and permissions on copied directories to ramdisk. Killing running processes got also some changes. (Hermann Hofer) - [voyage-sync] detect a reboot with data remaining in '/.sync/...' from a previously sync and copy this data over to the correct place before syncing and mounting to ramdisk. (Hermann Hofer) - PATCH[3/3]: command line processing for voyage.update (Christian Recktenwald) - PATCH: command line processing for format-cf.sh (Christian Recktenwald) - PATCH: prevent /sys /proc /dev and /tmp/cf from being copied by copyfiles.sh / alternate network installation procedure (Christian Recktenwald) - PATCH: Add -U flag to use flash media as-is (Darshaka Pathirana) 0.6.2 (07 Jul 2009) - [kernel] linux-image-2.6.26-486-voyage_6.0-3 - [general] Debian kernel source 2.6.26-17 - [general] enable ACPI and PM - [general] enable printk with time - [ide] CONFIG_IDE=y and enable hpt366 - [netdev] enable tulip, de2104x and cs89x0 - [usb] enable IR, IUU and TI chipset - [fs] enable xfs, autofs and nls_utf8 - [madwifi] upgrade to madwifi-trunk 0.9.4+r4022.20090513-1+6.0-3 - [misc] - add hostapd and wpa-supplicant configuration samples - change to use minstrel for madwifi rate control default - add quickboot for Live CD boot parameter - [voyage-util] - add VOYAGE_UNIONFS to /etc/default/voyage-util - patch to fix selecting console for Generic PC not persist [Sean Lazar] - add do-update.sh - voyage-sync: add 'sync' command argument - voyage-sync: kill process before unmount - voyage-sync: use tmpfs as default - voyage-sync: shutdown sequence change from K99 to S36 0.6.1 (17 Feb 2009) - based on Debian 5.0 (lenny) release - [kernel] linux-image-2.6.26-486-voyage_6.0-2 - [general] Debian kernel source 2.6.26-13 - [general] add microcode, MSR and CPUID support - [serial] 4 UARTS ports at runtime, additional serial modules - [usb] add sierra wireless module - [fs] add ntfs support - [misc] - voyage-sync script - fix owner permission - configurable unionfs/aufs (WIP) - move voyage-sync and voyage-pxe to voyage-util package - fix atftp for pxe boot for generic pc - add debian mirror list to /etc/apt/sources.lst - add non-free and contrib to /etc/apt/sources.lst - new amd64 port and sdk distro 0.6.0 (29 Dec 2008) - based on upcoming Debian 5.0 (testing/lenny) - both distro and Live CD built by Debian Live - [kernel] linux-image-2.6.26-486-voyage_6.0-1 - [general] Debian kernel source 2.6.26-12 - [general] enable large block device - [iosched] re-enable as and deadline scheduling - [geode] new geode timer and watchdog - [netfilter] enable RATEEST & TARPIT target - [netfilter] enable iprange, owner, rateest and time match support - [netsch] enable network emulator NETEM - [net] enable net dummy and macvlan - [net] increase IMQ devices to 16 - [netdev] enable b44, NAPI for nforce - [netdev] enable bnx2, intel 82575 (igb) and atl1e - [wireless] enable b43 and b43legacy - replacing bcm43xx, - [wireless] enable zd1211rw and rt2x00 - [video] enable media tuner drivers, usb video and quickcam messenger - [ata] enable some drivers to kernel modules (for VMWare) - [crypto] geode-aes, padlock and hifn hardware crypto drivers as modules - [crypto] include ocf-linux patch - [usb] enable USB high speed mobile device (hso) - [misc.] enable firewire - [misc.] enable netdev led trigger - [madiwifi] - upgrade madwifi-modules to 1:0.9.4+r3772.20080716-1+6.0-1 - upgrade madwifi-tools to 1:0.9.4+r3772.20080716-1+6.0-1 - [misc.] - removed /rw and /ro and are replaced by aufs, for /var/log and /var/tmp - nocatsplash rebuild for Debian Lenny - netdev led trigger enabled for wrap and alix - pump to replace dhclient - add arptable, aufs, conntrack, file, lsof and sudo to distro - ocf-enabled libssl 0.5.2 (29 Jun 2008) - [madiwifi] upgrade madwifi-modules-2.6.23-486-voyage to version 5.0-2 - [general] update wireless-tools to version 29-1 0.5.1 (23 Jun 2008) - [kernel] linux-image-2.6.23-486-voyage_5.0-2 - [general] enable math emulation - [netdev] enable gigabit dl2k, e1000e, ns83820 drivers - [framebuffer] enable lxfb for geodelx framebuffer support - [snd] enable snd_usb_audio - [voyage-utils] - enables heartbeat and ide LED drivers for ALIX and WRAP profiles. - new 4801 profile options - [general] add security.debian.org to /etc/apt/sources.list 0.5.0 (29 Feb 2008) - [kernel] linux-image-2.6.23-486-voyage_5.0-1 - [general] Debian kernel source 2.6.23-2 - [general] enable HPET and dynamic ticks - [geode] backport new mfgpt codes from 2.6.24 - [net] built-in KLIPS for openswan - [netfilter] enable ipv6 netfilter - [scsi] add 3w_9xxx and aac_raid driver - [ata] add basic support for sata and pata drivers - [wireless] add bcm43xx driver - [pcmcia] add basic support for PCMCIA usb network driver - [v4l] enable video capture, usb support and radio adaptor - [fs] build-in unionfs - [misc] enable LED drivers - [wireless] - madwifi driver update to 0.9.4rc2 - [general] - no. of fixes and enhancements in voyage.update [William Brack and Mike O'Connor] 0.4.1 (23 Jul 2007) - [kernel] linux-image-2.6.20-486-voyage_4.0-2 - [general] ubuntu kernel source 2.6.20-16.29 (Linux 2.6.20.10) - [ide] enable CS5535 chipset support - [netsched] add esfq queueing - [char] increase max. number of 8250 serial port to 20 - [char] add AMD CS5535 UART2 as a serial port - [char] add AMD Geode multi-purpose timers - [char] add real time clock support - [watchdog] add geodewdt for Geode GX/LX watchdog support - [hwmon] add k8temp and w83781d - [usb] add UDC/UOC support for Geode CS5536 companion chip - [snd] enable Advanced Linux Sound Architecture - [snd] ATI IXP, ALI and VIA AC97 controllers - [snd] CS5535 audio, SB Audigy, Creative Ensoniq/Emu10k1, Intel HD - [wireless] - madwifi driver update to 0.9.3-3 with security fix - wireless-tools upgrade to 29pre22. - [general] - add ALIX and 5501 profile in voyage.update and PXE boot menu - add build date in /etc/motd - move /etc/network/run to /rw 0.4.0 (23 Jun 2007) - new x.y.z versioning scheme - linux-image-2.6.20-486-voyage_4.0-1 - [general] ubuntu kernel source 2.6.20-16.28 (Linux 2.6.20.10) - [iosched] set CFQ as default IO scheduler - [bus] add PCI Express and NatSemi SCx200 HR Timer support - [netfilter] add userland conntrack support - [netsched] add red and tbf queueing - [blkdev] add CS5535 support - [netdev] add forcedeth and VIA Rhine NAPI support - [wireless] remove ieee80211_softmac stack and ipw3945, add iwlwifi driver - [wireless] add devicescape wireless stack - bcm43xx now uses dscape stack - [watchdog] add sc1200wdt, w83627hf_wdt, w83697hf_wdt and w83977f_wdt - [i2c] add CS5535 gpio support and remove incompatible i2c_nscacb - [usb] add Garmin USB serial support for GPS devices and QuickCam support - [cypto] add Geode LX AES support - update madwifi-tools and madwifi modules (0.9.3) - remove devices from /dev as udev taking care of it - remove udev net-generator rules and script - fix PXE boot with console screen - Live CD now shows splash logo at boot screen 0.3.1 (14 Apr 2007) - sync with Debian 4.0 etch release 0.3 (16 Mar 2007) - update madwifi-tools and madwifi modules (0.9.2_svnr2156) - installation script update - remove /etc/network/options, replaced with /etc/sysctl.conf - Live CD: enable boot prompt and support auto-install - trafmon script and bash_completion (by Solomon Asare) 0.3pre3 (28 Jan 2007) - kernel-image-2.6.17-486-voyage_3.0-3 - [general ] ubuntu kernel source 2.6.17.1-10.34 (Linux 2.6.17.14) - [scsi] Fusion MPT device - [netdev] gigabit ethernet: e1000, tg3, r8169 - [fs] squashfs is now in kernel module - [fs] nfsd kernel module - madwifi modules (0.9.2_svnr1842) - add iperf, iptraf, netcat, sqlite3 & tcpdump - remove modutils 0.3pre2 (05 Dec 2006) - kernel-image-2.6.17-486-voyage_3.0-2 - removal of kernel drivers to minimize disk space - enable CAPI and mISDN driver - enable regparm - madwifi modules (0.9.2_svnr1809) - fix on ed/nano not removed cleanly - update on voyage.update 0.3pre1 (17 Nov 2006) - based on Debian 4.0 (etch) - kernel-image-2.6.17-486-voyage_3.0-1 - [general] Ubuntu linux source 2.6.17-10.33 - [general] kernel ticks count at 1000HZ - [general] ACPI support - [netfilter] enable all netfilter xt_target - [netfilter] layer7, ipp2p, time netfilter support - [netfilter] NET_SCH_ESFQ, IFB and IMQ - [wireless] ieee80211_softmac and devicescape 802.11 wireless stack - [wireless] adm8211, bcm43xx, zd1211, acx, prism54_softmac, rtl818x, rtl8187 - [wireless] ipw3945, rt2400, rt2500, rt61, rt73 - [netdev] NE2000 ISA support - [netdev] pcnet PCMCIA support - [netdev] ISDN support - [fs] squashfs, unionfs and nfs v4 - madwifi modules (0.9.2_svnr1784) - booted with initrd and grub - newly written installation/updating scripts (by William M. Brack) - voyage.update now in ./usr/local/sbin 0.2 (5 Apr 2006) - kernel-image-2.6.15-486-voyage_2.0-10 - Debian linux source 2.6.15-8 - enable syn cookies - add hostap-EAPOL-fix.patch - updated hostapd and wpasupplicant to 0.5.2 - madwifi-ng modules (r1491) - add parprouted and bzip2 - voyage-util to sync /var/run in shutdown - add voyage-configure.sh, format-cf.sh to /usr/local/sbin - add voyage.conf to /etc - add voyage login banner - increase /rw tmpfs to 8M 0.2pre4 (26 Feb 2006) - kernel-image-2.6.15-486-voyage_2.0-9 - Debian linux source 2.6.15-7 - PXE booting with CRAMFS (CONFIG_BLK_DEV_RAM, CONFIG_BLK_DEV_INITRD and CONFIG_CRAMFS) - i2c-nscacb support for Routerboard - prism54 WDS support - add more samples in /etc/network/interfaces - add bcm43xx firmware in /usr/lib/hotplug/firmware - add new util, mount-proc.sh in /usr/local/sbin - improved remove.docs - add "options ath_pci autocreate=none" in /etc/modprobe.d/madwifi - remove SystemV timezones - madwifi-ng modules (r1453) - add traceroute 0.2pre3 (05 Feb 2006) - kernel-image-2.6.15-486-voyage_2.0-8 - usbserial_maxsize.patch (usb high speed serial patch) - cdc-acm_2.6.14.c.patch (cdc_acm high speed patch) - NFS v3 client, rootfs & IP PNP (to support pxeboot in future) - remove madwifi driver in kernel source (now madwifi available in separate modules) - DOS/FAT/NT file systems - SCSI disk storage (sd) and generic storage (sg) support - NLS support for code page 437 and ISO-8859-1 - loop and cloop - madwifi-ng modules (r1408) as default. - root password now defaults to "voyage" - DHCP enabled for dnsmasq - add less package - wireless-tools 27+28pre13 - customization scripts (in /usr/share/voyage-custom) 0.2pre2 (06 Jan 2006) - kernel-image-2.6.15-486-voyage_2.0-7 - ipv6 basic support - video for linux - usb serial - lm77 fix for negative temperature (by Michael Renzmann) - scx200_acb probe delay fix (only 2.6.12, 2.6.14 and 2.6.15, by Ben Gardner) - madwifi-old CVS 20051224 - add scx200_acb and lm77 to /etc/modules if for WRAP option in voyage.update - regenerate ssh host keys for first time installation 0.2pre1 (21 July 2005) - New 0.2 development - kernel-image-2.6.8-486-voyage_2.0-2 - Support module unload ( requested by Matthias Lemke ) - sc520_wdt ported from 2.6.12 ( suggested by Pablo Osuna ) - madwifi_20050712 MAIN branch (merged from BSD branch supported for adhoc mode) - hostap 0.3.9 driver - USB support - Bluetooth support - Remove ipw2100 module, which is available in separate kernel module package - change apt repository to http://www.voyage.hk/dists/0.2 - use madwifi-tools instead of madwifi - remove posix and right in /usr/share/zoneinfo (less 2MB in distro) - change fstab to mount / as read-write - use /etc/init.d/voyage-util script (by Yiorgos Adamopoulos) - set root password in first run - call /etc/init.d/rmnologin - remount / read-only - voyage.update - new WRAP option (detach from 4501/4801 option) - remove setting passwd - use reboot=bios (in lilo.conf) for WRAP =========================================================================== 0.1sarge (7 July 2005) - special release for based on Debian Sarge (r3.1) 0.1 (14 Feb 2005) - add ebtables and ifenslave - update kernel image revision to 1.4 : kernel-image-2.6.8-486-voyage_1.4_i386.deb - enables i2c, lm77 sensors and other hardware sensors. 0.1pre5 (1 Feb 2005) - fix high cpu consumption in nocatsplash - new Debian kernel source 2.6.8-13 - update kernel image revision to 1.3 : kernel-image-2.6.8-486-voyage_1.3_i386.deb - add bonding, dm-mod and dm-crypt modules - add necessary modules required by OpenSWAN/FreeSWAN - fix kernel reboot for WRAP board 0.1pre4 (17 Jan 2005) - nocatsplash 0.92 - fixed syslogd not logging - nat.sh: integrate with nocat 0.1pre3 (13 Jan 2005) - new upstream Debian kernel source 2.6.8-12, with new driver patches - update kernel image revision to 1.2 : kernel-image-2.6.8-486-voyage_1.2_i386.deb - hostap-driver 0.2.6 (update) - madwifi-cvs 20050109 (update) - rt2400 driver 1.2.1 (new) - ipw2100 driver 1.0.2 (new) - wd1100 driver (new, ported to 2.6 kernel) - change sarge.install to voyage.dpkg-l - change sarge.dpkg.list to voyage.dpkg.list - change sarge.depend.list to voyage.depend.list - add watchdog package 0.1pre2 (6 Jan 2005) - fix madwifi driver not loading - support for various config from installation script - add lilo.conf to /etc/ 0.1pre1 (2 Jan 2005) - first preview release - based on Debian Sarge r3.1 - 2.6.8.1 kernel - prism54, hostap and madwifi drivers - hostapd, wpa_supplicant from sarge